BAUTECH RAPFLEX 10

Descrição: 

Is a bicomponent Micro concrete, ready for use, free of chloride, based on special cement, with selected aggregates, additives and fibers.

Informações do produto: 

FIELDS OF APPLICATION

  • Quick Repair on floors and pavements of concrete in industries and highways. Allows the release of the repaired area to vehicular traffic in just 2 hours.
  • Fixing machinery and equipment, allowing for extremely fast maintenance stops;
  • Repair of the edges of the expansion joints on bridges and viaducts;
  • Repair of concrete in industrial areas under the presence of acid (pH> 3.5), fats, oils, sulfates and cleanliness products;
  • Execution and floor repairs in cold storage chambers at temperatures up to negative 4° F (consult our technicians on procedures);
  • It allows the concrete to be painted in just 24 hours.

 

TECHNICAL SPECIFICATIONS

  • Easy to apply, just mix the two compounds (micro concrete and additive)
  • High initial strength after 2 hours;
  • High long term mechanical strength;
  • High resistance to aggressive agents such as acids and sulphates;
  • Extensive use between, 41° F to 95° F;
  • Low sensitivity to low temperatures;
  • Shrinkage compensated;
  • Excellent resistance to ice / thaw cycles;
  • Liberation micro concrete to be painted in just 24 hours.

 

PROPERTIES

PACKAGING

55.12 lb (micro concrete) + 0,74 gallon of additive

DENSITY

140.5 lb / ft3

GRAIN SIZE (in)

0 to 3/8”

CONSUMPTION

23,4 lb /ft2/ 2.0 thickness

INITIAL SET

86°F (20 min) 68°F (40 min)

FINAL SET

1 Hour

SHELF LIFE

24 months from date of manufacture

 

SITE PREPARATION

  • All substrate must be structurally sound, solid, rough, • clean and free of any substance that can reduce adhesion as grease, oil or dust. Portland concrete base must have a minimum of 3 days;
  • Breaking the substrate to achieve a concrete good resistance, minimum depth of 2,0 cm leaving the vertical edges; remove by mechanical means, the surface of the cream base of concrete to find gravel.
  • All types of substrate must be washed with water. Remove excess water before the application

 

PRODUCT PREPARATION

  • Mix each 55,12 lb bag of RAPFLEX PLUS with the second component, RAPFLEX PLUS additive with 0,74 gallon, specially developed to increase adhesion to substrates.;
  • Mixing time: 4 - 5 minutes
  • In manual mixing not use more than one bag and mix with energy;
  • Working time of mix: 25 minutes at 68° F or 15 minutes at 83° F;
  • Do not use less than one bag;

 

APPLICATION

  • Launch RAPLEX 10 with the aid of a vibrator or a metal rod in the case of areas smaller than 10 ft2.
  • Give the finish with a trowel.
  • After the start of drying, keep moist and surface covered with wet plastic bags for at least 2 hours.

Thicknesses and Boards:

  • Minimum thickness (in): 2”
  • Distance between joints (in): 800”.

Special Applications

  • In temperatures around 32° F, mix each bag of RAPFLEX 10 with 0,74 gallon of hot water (± 120° F)

 

MECHANICAL STRENGTH

TIME2 hours6 hours24 hours7 days28 days
COMPRESSIVE STRENGHT (psi)

2900

50705800> 7250> 7250
FLEXURAL STRENGTH (psi)362450580650> 790

 

PRECAUTIONS

  • Keeping the closed container when not in use.
  • Never reuse the packaging for any purpose other than the conditioning of the product.
  • Store the original packaging in a dry, ventilated area away from heat sources.
  • Keep out of reach of children and pets.
  • Prepare and apply the product to the ever-drying ventilated area.
  • We recommend the use of PPE (personal protective equipment) such as gloves, boots and goggles.
  • In case of contact with skin and eyes, rinse with clean running water for 45 minutes. If swallowed, do not induce vomiting. In both cases, consult a doctor immediately and take the pack.
 

WARRANTY

The information contained herein is supported by tests, analyzes and technical knowledge. Measured values and results may fluctuate due to environmental characteristics and / or use of the product that are not manufacturer's responsibility. There is no other express or implied warranties. No agent, seller, distributor or dealer has the authority to extend, modify or suppress these provisions.

 

LIMITATIONS

  • Do not mix with Portland cement or apply on Portland cement concrete still fresh.