Patching and skin coating in concrete, ceramic, wood and masonry floors prior to the installation of a floor covering.
• Easy installation;
• Fast setting;
• Low Cost;
• Exceptional Bond Strength;
• From featheredge to ½” ;
• High Coverage;
• Won’t Soften or Stain.
|
 |
RAPID FINISH is ready to use, easy to apply, special cement and additives based.
Limitations
• For interior use only
• Do not use as a concrete resurfacing material, when concrete surface is to be left exposed or unprotected.
• Do not use when the substrate temperature is or will be in the next 24 hours below 41°F or above 100°F.
Surface Preparation
• All substrate must be dry, structurally sound, solid, clean and free of any substances which may avoid or reduce adhesion.
RAPFINISH Preparation
• Pay attention to the cleanness of tools and utensils;
• The recommended mixing ratio is two parts of RAPID FINISH to one part by volume of water;
• Mix by hand, or with mixing paddle and a drill to achieve the desired trowelable, lump-free consistency;
• Mix time: 3- 4 minutes;
• Pot life: 15 - 20 minutes at 70°F.
Placement
Use a flat steel trowel, and spread RAPID FINISH within 20 minutes.
Thickness Recomendation
Up to ½” thick per application. Maximum thickness should not exceed 1”.
Liberation
• 3 horas after the placement;
• For any type of paint job, 16 hours after the placement
Technical Data
| Package |
11 lb |
| Water |
2,5 Q per bag |
| Color |
Gray |
| Cobertura/ rendimiento |
6–16 sq ft / lb |
• Initial set (68º F): 20 min.
Caution
Contains Portland cement CAS #65997-15-1. Freshly mixed cement products may cause skin injury. Avoid contact with skin when possible and wash exposed areas promptly with water. If any product gets in the eye, rinse immediately with water. Wear a dust mask, eye protection, and rubber gloves.
Warranty
Bautech warrants this product is free from manufacturing defects and the warranty extension is limited to the product’s purchasing price, only if proved to be defective and when used as recommended. There is no other warranty expressed or implicit and no salesman, agent, distributor or dealer has the authority to extend, modify or suppress these provisions.
For more information contact Bautech’s Technical Department.
Shelf Life
Twelve months, from the fabrication date, stored in the unopened container and in a
cool and dry area.
|
